SCHEDULED MAINTENANCE WORK SHEET

TARP ADJUSTMENT	RECOMMENDED	CHECKED BY	DATE
Cable Tension	Not touching 18" ahead of rear pulley	______________________	__________
V-Belt or Chain	Firm Tension	______________________	__________
Tarp Length	Stretched tight	______________________	__________
Bow Alignment	All aligned	______________________	__________

CHECK TORQUE ON ALL SUSPENSION FASTENERS:

H-9700 (4 SPRING OR REYCO 886 SPRING SUSPENSION:

CHECK TORQUE ON ALL WHEEL END FASTENERS:

GREASE GATE HINGES~ AXLE CAM BUSHINGS & SLACK ADJUSTERS:

CHECK FOR PROPER ADJUSTMENT AND OPERATION OF BRAKES:

Check Brake Wear	Amount of shoe remaining	LF /32	LR /32
	(New is 24/32-Min 8/32 required	RF /32	RR /32
	RECOMMENDED	CHECKED BY	DATE
Check Push Rod Adjustment	Not more than 1-7/8" stroke	______________________	__________
Check Brake Drums	No cracks - excessive wear	______________________	__________
Check Brake Operation	No air leaks - All brakes operating	______________________	__________
Check ABS System	See book on System	______________________	__________

CHECK FOR PROPER OPERATION OF GATE SYSTEM:

Check for air leaks	No leaks in hoses & fittings	______________________	__________
Check Lubricator	4 to 5 drops per cycle minimum	______________________	__________
Check Air Filter	Drain works - Filter not clogged	______________________	__________
Check for smooth gate operation	No hesitation or sticking	______________________	__________

CHECK ALL TIRES FOR PROPER INFLATION AND EVEN WEAR PATTERN:

Check Inflation See instructions on tire for proper inflation

Check Tread Depth (Min. 4/32 Required)