our products
 |
Set of Doubles Models 11-20 & 12-21 Bottom Dump Trailers |
- Weight: 13,400 lbs. (approximately)
- Paint: Polyurethane
- Gates: Windrow Type; Gate end 10 gauge Hi-tensile Gate
bottom 10 gauge Hi-tensile with 4"x4" reinforcement Twin composite barrel air cylinder actuators Adjustable chains front and rear
- Skins: 12 gauge Hi-tensile steel
- Shedplates: 14 gauge steel, welded on
- Bang Boads: 2"x10" wood bolted on
- Turnable Fenders: Steel Weld On
- Gate Controls: Versa Valve on left side, electrically actuated from
truck cab
- Gate Hoses: Hoses are 1/2" with one quick release valve per cylinder
- Gate Seals: Steel welded on exterior of gates
- Electrical: DOT approved 12 volt sealed lighting system
- Plumbing: DOT approved system
- Under Mount: Three leaf springs, 36" German turntable double bearing
|
|
 |
General Purpose CalifoRnia Special Belly Dumps |
- Capacity: 24 cubic yards (approximately)
- Weight: 13,400 lbs. (approximately)
- Paint: Polyurethane
- Gates: Windrow Type; Gate end 10 gauge Hi-tensile Gate
bottom 10 gauge Hi-tensile with 4"x4" reinforcement Twin composite barrel air cylinder actuators Adjustable chains front and rear
- Skins: 12 gauge Hi-tensile steel
- Shedplates: 14 gauge steel, welded on
- Bang Boads: 2"x10" wood bolted on
- Turnable Fenders: Steel Weld On
- Gate Controls: Versa Valve on left side, electrically actuated from
truck cab
- Gate Hoses: Hoses are 1/2" with one quick release valve per cylinder
- Gate Seals: Steel welded on exterior of gates
- Electrical: DOT approved 12 volt sealed lighting system
- Plumbing: DOT approved system
- Under Mount: Three leaf springs, 36" German turntable double bearing
- Axles: 5" diameter with oil seals. 22,500 lbs. capacity, 71.5" track
- Drums: Centrifuge outboard drums
- Brakes: ABS braking system, 16.5"x7" Scam type, auto slack
adjusters
- Drawbar: 87" long, square tubing, cast steel hinged bracket,
rubber bused, 2.375" ID swivel type eyebolt with safety cable
- Wheels: 11 x 22.5 or 11 x 24.5 Steel Disc.
|
|
 |
Plant-to-Plant CalifoRnia Special Belly Dumps |
- Capacity: 27.5 cubic yards (approx.) per set
- Gates: Windrow Type
- Gate end .190 aluminum 5052
- Gate bottom .190 aluminum 5052
- Twin composite barrel air cylinder actuators
- Adjustable chains front and rear
- Skins: .125 aluminum 5052 drop in liner
- Shedplates: 16 gauge aluminum
- Fenders: Mill finish aluminum round (24x48) bolt on
- Gate Controls: Versa Valve on left side, electrically actuated from truck cab
- Gate Hoses: Hoses are 1/2" with one quick release valve per gate
- Gate Seals: Aluminum welded on exterior of gate
- Risers: .090 aluminum 5052 bolt on with 26" sides and flared ends
- Electrical: DOT approved 12 volt sealed lighting system
- Plumbing: DOT approved system
- Under Mounts: Three leaf springs, 36" turntable bearing
- Axles: 5" diameter - 71.5" track
- Drums: Duralite with centrifuge drum
- Brakes: ABS braking system, 16.5"x7"
- Drawbar: 131.5" long, square tubing, cast steel hinged bracket,
rubber
bused, 2.375" ID swivel type eyebolt with safety cable
- Tires: 11.22.5
- Wheels: Aluminum mill finish
|
|
|