Download Spec Sheet |
 Click image to enlarge.
|
 Click image to enlarge. |
 Click image to enlarge. |
7000 Gal Stainless Steel Trailer
Specifications
- Type: Straight Round, Dot 407 Spec
- Capacity: 7000 Gallons, Plus 2%
- Compartment: Single
- Commodity: Unspecified Fluids Design 25 Psi Internal
- Pressure: 38 Psig Hydrostatic Test
- Temp: 250 Deg F Maximum
- Shell: 10 Ga, 316l Stainless Steel, 2b Finish
- Head: 10 Ga, 316l Stainless Steel, 2b Finish, Asme F&D
- Baffle: None
- Welds: Internal – Ground Flush, External – As Welded
- Stiffener Rings: External Hat Channel, Solid Welded
- Manway: 20” Manhole, 6 Hold Down, Hypalon Gasket In Lid,
Near Center Of Tank, Hinged To Front
- Cleanouts: 2 – 3” Male Pipe Nipple With Stainless Steel On Top Center Line, Within
10” From Each Head Seam
- Over Turn Protection: Spill Dam At Top Manway With Drain Hose, Includes Relief
Valve And Vapor Recovery Valve
- Emergency: Betts 4” X 3”Hydraulic Operated
- External Valve: Pump Located At Rear, Fusible/ Frangible Breakaway Located At
Front
- Outlet Valve: Betts 3” Qrb Hydrolet With 90 Deg Outlet, 3” Spool Piping As Short
As Possible (If Needed). 3” Ss Cam Lock And Cap With Retainer Cable
- Vapor Recovery: 3” X 2 Tee Style Hydraulic Operated Valve Sequenced with Emergency
Valve, Pressure Gauge Installed In Tank Connection Pipe, Top Connection With
Ball Valve, Cam Lock And Cap, Drivers Side Connection At Rear With Pressure Gauge,
Ball Valve, Cam Lock And Cap
- Relief’s:Dot Specification, Fort Vale Stainless Steel Pressure/Vacuum Relief
Valve, Located In Spill Dam With Air Kit And Gauge
- Level Gauge: Garnet 808p2 Level Gauge With 316 Float
- Thermometer: 0 - 3000 Deg Installed On Side
- Heating System: Stainless Steel Channels Full Length, 150 Psi Mawp,Steam And
In Transit, Inlet And Outlet At Front
- Insulation: 6” Fiberglass Compressed To 5”, .080 Aluminum Underlayment 24” Wide
- Jacketing: 22 Ga Ba/Ss, Lapped Seams, 18 Ga #4 Finish Lock Seam Jacket On Heads
- Additional Components: All Bolsters, Long Members, Sub Frame, Suspension Box,
Bumper, Hose Tube Mounts And Fender Mounts Constructed From Stainless Steel
- Hose Tube: 2 – 8” X 21’ Hose Tube, One Each Side
- Ladder: Bolt On Ladder To Spill Box With Top Platform Step And Grab Handles (No
Side Hand Rail) Installed On Curb Side. 19” Wide Walkway To Cleanouts, 12 Wide
On 3 Sides Of Spill Dam
- Lights: Full Dot Lights, Led Sealed Lights, Harness And Junction Box With Terminal
Strip
- Suspension: Hutch 9700 With 3 Leaf High Arch Springs
- Axles: 25,000 Lb Round With Outboard Drums
- Wheels: 10 Hole Steel, Hub Pilot
- Tires: 11.00 X 24.5 Radial
- Brakes: 16 1/2 X 7 With Spring Parking, Auto Slacks, Wabco 4s-2m Abs System
- Upper Coupler: 5/16” Bolster Plate, Bolt On Adjustable, 49” Truck 5th Wheel Height
- Landing Legs: 2 Speed, Heavy Duty, High Capacity Lift
- Bumper: Heavy Duty Per Dot Requirements
- Fenders: 3/4 Fenders On Front, Full On Rear
- Mud Flaps: Anti Sail
- Placards: 4 – Slide In Placard Frames
|
